10-Frame West Beetle Trap Complete
West Beetle trap fits on a level bottom board (not Included)
Use this trap any time beetles are present. However since Small Hive Beetles (S.H.B.) are temperature sensitive it will be far more effective during late spring to fall when beetles are out of the cluster and most active. Included with your West Beetle Trap are wooden spacers needed to modify your bottom board (not included), to allow the honey bees to enter and exit the hive while the West Beetle Trap is in place.
Before installing the West Beetle Trap, thoroughly clean and scrape, if necessary, any debris or burr comb from the bottom board that may interfere with the proper placement of the West Beetle Trap. It is critical that the trap is level before adding the vegetable oil. Place trap on bottom and fill 1/2 with oil, purchased separately. Place cover on trap. Do not pour oil through the trap cover, as any spilled oil may cause bee mortality. At this time you may reassemble your hive and start trapping beetles! Periodic cleaning of the traps is necessary. Check traps every 7-14 days.Tips: The manipulation of your colony will disturb the S.H.B. hiding spots causing them to move around in the colony and find the trap sooner. Storage and Disposal After use, discard used oil in an approved manner. Clean traps and store away from direct sunlight and any pesticides. BOTTOM BOARD NOT INCLUDED
Ship wt. 5 lbs.
|Shipping Type||Free Shipping|
|Hive Width Compatible||10-Frame|
|Treatment Type||Hive Beetle|
Write Your Own Review